Oakton DO 700台式溶氧仪，NIST校准

Oakton DO 700 Benchtop Dissolved Oxygen Meter with NIST-traceable Calibration

结构紧凑，节省空间的设计相较于其他台式仪表小了近40％

超大3-1⁄4″ x 2-7⁄16″ (8.3 x 6.2 厘米)，明亮的液晶显示屏，便于查看测量值

低维护的电探头无需预热时间

内置存储器最多可存储100个数据点

DO 700仪表测量溶解氧毫克/升，PPM或％饱和度的同时显示温度°F或°C。DO的测量是从0至30毫克/升（ppm）或从0至300％的饱和度，以满足各种各样的应用程序的需要。独立的100％和0％校准点为整个量程提供精度。测量精度可以通过手动气压和盐度补偿仪表自动校准偏移。内置自动温度补偿（ATC）提供更高的精度校正介乎32至122°F（0到50°C）的温度变化。

超大显示屏测量3-1/4“×2-7/16”（8.3× 6.2厘米）通亮测量，便于观看。LCD还设有报警器，以帮助操作和故障排除。设置功能显示电极的斜率和偏移。仪表是封装在一个小巧的6-1/8“长 X 6-7/8”宽x 2-3/4“高（15.5×17.5×6.9厘米）外壳占用最小的工作台空间，比同类仪表小了近40％的空间。

防水膜键盘和方便拉出参考指南为实验室提供有用的功能。仪表的其他功能包括数据记录能力可达100点，内置电极支架，可切换到仪表两侧，保持功能可选°F /°C的温度测量。

包含：溶解氧探测器35642-50，内置电极支架，和100/240 VAC电源适配器。

Compact, space-saving design is nearly 40% smaller than other benchtop meters

Extra-large 3-1⁄4″ x 2-7⁄16″ (8.3 x 6.2 cm), brightly lit LCD for easy viewing of measured values

Low-maintenance galvanic probe requires no warm-up time

Built-in memory stores up to 100 data points

DO 700 meter measures dissolved oxygen in mg/L, ppm, or % saturation with simultaneous temperature display in °F or °C. DO is measured from 0 to 30 mg/L (ppm) or from 0 to 300% saturation to meet the needs of a wide array of applications. Independent 100% and 0% calibration points provide accuracy over the entire range. Measurement accuracy can be increased by manual barometric pressure and salinity compensation—meter automatically calculates offset. Built-in automatic temperature compensation (ATC) provides greater precision by correcting for temperature variations between 32 to 122°F (0 to 50°C).

Oversized display measures 3-1⁄4″ x 2-7⁄16″ (8.3 x 6.2 cm)and is brightly lit for easy viewing of measurements. LCD also features annunciators to aid in operation and troubleshooting. Setup function displays electrode slope and offset. Meter is encased in a compact 6-1⁄8″L x 6-7⁄8″W x 2-3⁄4″H (15.5 x 17.5 x 6.9 cm) housing which takes up minimal bench space—nearly 40% less space than comparable meters.

Water-resistant membrane keypad and convenient pullout reference guide provide useful features for the lab. Additional meter features include datalogging capabilities up to 100 points, a built-in electrode stand that is switchable to either side of the meter, Hold function, and selectable °F/°C temperature measurement.

What’s Included:

Dissolved oxygen probe 35642-50, built-in electrode stand, and 100/240 VAC power adapter.