Oakton防水PCD 650多参数测量仪与NIST校准

较上一型号扩大了量程，分辨率和精度，扩展了仪器的内存改进了仪器的通信系统！

缺失数据现象得到了改善！无日期设置和未履行校准现象得到了改进！

优化了电缆练级，节省了仪器连线时间！

在肮脏和潮湿的环境中依然表现良好

该款机型的性价比较高，提供了一些更昂贵机型才配备的功能。IP67级外壳允许在肮脏和潮湿的环境中使用而不损害仪器。数据存储点高达500个，时间和日期可设置。用户可选择“校准”报

警，以及自动或手动识别标准，单个或多个校准点使得数据的质量目标更加灵活。红外（IrDA）无线技术，可以让你轻松下载数据，无需额外的电源线。大型背光​​LCD显示屏可以显示测量值，

测量单位，温度，时间，电池寿命，和菜单选项等信息。PH值的测量在量程范围内精度可达±0.002 -2.000 20.000。pH值校准功能包括多达6个校准点，用户可设置“校准”报警，以及美国

，NIST，DIN和PWB标准自动缓冲识别多达15个缓冲选项。仪表的测量电导率（高达500 MS），TDS，盐度，电阻率等参数通过一个2或4电极电导池实现。线性或纯水的温度补偿曲线在各级别电

导率范围内提供了准确的测量数据。还设有设定点报警表以提示当前浓度超出了预设浓度限额。仪表能测定的血氧饱和度最高达600％和浓度最高为90毫克/升， 电溶解氧探头不需要任何预热

时间，这样你就可以立即读数。集中手动输入后自动补偿盐度修正。能够实现气压计气压自动补偿。物品清单：数据管理软件，探头支架和电池。仪表探头延长杆：双结的pH电极，两节传导

性电池，一个溶解的氧气探头。仪表套件补充说明：校准缓冲液pH值传缓冲器，电导率校准装置，溶解氧探头更换膜包，橡胶保护套，硬手提箱。

Oakton Waterproof PCD 650 Multiparameter Meter Kit

Expanded range, resolution, and accuracy, plus increased memory and advanced communications!

No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!

Don’t waste time looking for those cables!

Use in dirty and wet environments

This top-of the-line waterproof meter offers features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet 

environments without harm to the meter. Datalog up to 500 points with time-and-date stamp. User-selectable “calibration due” alarms, automatic or manual standards 

recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily 

download data—no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

The pH range is from –2.000 to 20.000 with accuracies up to ±0.002. The pH calibration capabilities include up to six calibration points, a user-settable 

“calibration due” alarm, and up to 15 buffer options with auto-buffer recognition of USA, NIST, DIN, and PWB standards. 

Meter measures  (up to 500 mS), TDS, salinity, or resistivity with either a 2-or 4-electrode conductivity cell. Linear or pure-water temperature compensation curve 

provides accurate data at all levels of conductivity. Also features set point alarms to indicate when concentrations are outside of programmed limits.

Meter determines oxygen saturation up to 600% and concentration up to 90 mg/L. The galvanic dissolved oxygen probe does not require any warm-up time so you can take 

readings immediately. Salinity correction is automatically compensated for after manual input of concentration. Barometric pressure is automatically compensated for by 

the included barometer. 

What’s Included:

data management software, probe holder, and batteries.

Meter with probes adds: double-junction pH electrode, 2-cell conductivity cell, and a dissolved oxygen probe.

Meter kit further adds: pH calibration buffers, conductivity standards, dissolved oxygen probe replacement membrane kit, protective rubber boot, and hard carrying case. 

产品规格
产品类型	多参数计
仪表风格	手提
外形尺寸（W）	3-1/4
尺寸（“H）	7-1/4
尺寸（“D）	2-1/4
范围（pH值）	-2.000 20.000
范围（mV的）	±2000
范围（电导率）	0至500毫秒
范围（TDS）	0至500个百分点
范围（盐度）	80个百分点
范围（电阻）	0至20,000 M欧姆
范围（ISE）	0.001至19,900 ppm时，磨牙，或毫克/升
范围（溶解氧）	0到49.49 mg / L的
范围（温度°C）	-10至110
范围（温华氏度）	14至230
分辨率（pH值）	0.1，0.01，0.001
分辨率（温度）	0.1°C /°F
分辨率（MV）	0.1
分辨率（电导率）	满量程的0.05％
分辨率（TDS）	满量程的0.05％
分辨率（电阻）	满量程的0.05％
分辨率（ISE）	2个或3个数字
分辨率（溶解氧）	0.1％，0.01毫克/升
分辨率（盐度）	满量程的0.05％
准确度（PH）	±0.002
准确度（温度）	±0.9°F（±0.5°C）
精度（mV的）	±0.2毫伏
精度（电阻）	±1％满量程
精度（ISE）	0.5％FS（单价）; 1％FS（价）
精度（溶解氧）	±2％中，±0.2毫克/升
精度（电导率）	±1％满量程
精度（TDS）	±1％满量程
准确度（盐度）	±1％满量程
温度补偿	自动或手动
显示	液晶显示
校准	6
防水	是
缓冲液识别	美国NIST，DIN
功率	四节1.5V电池（附带）或可选的通用AC适配器
品牌	OAKTON

Specifications
Product Type	Multiparameter Meters
Meter style	Portable
Dimensions (” W)	3-1/4
Dimensions (” H)	7-1/4
Dimensions (” D)	2-1/4
Range (pH)	-2.000 to 20.000
Range (mV)	±2000
Range (Conductivity)	0 to 500 mS
Range (TDS)	0 to 500 ppt
Range (Salinity)	80 ppt
Range (Resistivity)	0 to 20,000 M ohm
Range (ISE)	0.001 to 19,900 ppm, molar, or mg/L
Range (Dissolved oxygen)	0 to 49.49 mg/L
Range (Temperature °C)	-10 to 110
Range (Temperature °F)	14 to 230
Resolution (pH)	0.1, 0.01, 0.001
Resolution (Temperature)	0.1°C/°F
Resolution (mV)	0.1
Resolution (Conductivity)	0.05% full scale
Resolution (TDS)	0.05% full scale
Resolution (Resistivity)	0.05% full scale
Resolution (ISE)	2 or 3 digits
Resolution (Dissolved oxygen)	0.1%, 0.01 mg/L
Resolution (Salinity)	0.05% full scale
Accuracy (pH)	±0.002
Accuracy (Temperature)	±0.9°F (±0.5°C)
Accuracy (mV)	±0.2 mV
Accuracy (Resistivity)	±1% full scale
Accuracy (ISE)	0.5% FS (monovalent); 1% FS (divalent)
Accuracy (Dissolved oxygen)	±2%, ±0.2 mg/L
Accuracy (Conductivity)	±1% full scale
Accuracy (TDS)	±1% full scale
Accuracy (Salinity)	±1% full scale
Temperature compensation	Automatic or manual
Display	LCD
Calibration	6
Waterproof	Yes
Buffer recognition	USA, NIST, DIN
Power	Four 1.5V batteries (included) or optional universal AC adapter
Brand	Oakton