Cole-Parmer 环形电导率变送器，聚偏氟乙烯（PVDF），0到100毫秒

Cole-Parmer® Toroidal Conductivity transmitter, PVDF, 0 to 100 mS

Cole-Parmer^® Toroidal Conductivity Transmitters

科尔-帕默^®环形电导率变送器

内嵌或潜水安装

可供CPVC和PVDF型号

内置100Ω铂电阻温度传感器的温度补偿

电极电导率传感器加上两线回路供电4到20 mA变送器。传感器需要11至24 VDC电源供应，最大600欧姆。如果11至24 VDC电源还没有，订购流程表94785-12电源，显示传感器测量，或参阅我们的过程仪表部分其他型号。

独立的4至20 mA输出，可用于控制应用，连接到录像机，或报警器。该传感器具有的温度系数为0.3％/摄氏度，尺寸为8“长×1-1/2”直径插入深度4-1/2“。传感器配有10英尺电缆采用镀锡两端。

In-line or submersible installation

CPVC and PVDF models available

Built in 100 Ω Pt RTD temperature compensation

The electrodeless conductivity sensor is coupled with a two-wire, loop-powered 4 to 20 mA transmitter. The sensor requires an 11 to 24 VDC power supply and has a maximum draw of 600 ohms. If 11 to 24 VDC power is not already available, order process meter 94785-12 to power and display the sensor measurements, or refer to our process meter section for other models.

The isolated 4 to 20 mA output can be used for control applications, connected to a recorder, or an alarm. The sensor has a temperature coefficient of 0.3%/degC, and measures 8”L x 1-1/2” diameter with 4-1/2” insertion depth. Sensor comes with a 10-ft cable with tinned ends.