Cole-Parmer 聚偏二氟乙烯®外壳，接地PH电极

Cole-Parmer® Grounded Submersible pH Electrode with Kynar® Housing

几秒内更换电极套筒

扁面自洁 – 防止电极堵塞

这些自洁，双结电极有扁测量面，以尽量减小电极涂层，划伤，破损。流体流过表面起到净化作用，延长您的电极寿命并提高了性能！

可替换套筒让你保持你原有外壳。环形结，防止堵塞，并允许快速，稳定的响应。使用粘性溶液与硫化物或重金属。

选择CPVC或化学耐的Kynar  ®   外壳（，外壳包括电极盒）。所有5电极风格额定在170ºF（76ºC）到100磅; 50 PSI在212ºF（100°C）。

镀锡端温度元件连接（适用时），氟橡胶O环，和说明。使用所有型号的前置放大器套件（另售）进行远程安装到1000英尺远。

CPVC和KYNAR组件不可互换。这种潜水式电极适合系统外校准水槽，但在安装时提供了不正确的读数。一个解决方案的地面和内部电池供电的接地回路中断战斗干扰。内置放大器电极盒允许长电缆运行。

Replace electrode cartridges in seconds!

Flat surfaces are self-cleaning – prevents electrode clogging

Ground loop interrupt eliminates electrical interference

These self-cleaning, double-junction electrodes have flat measuring surfaces to minimize electrode coating, scratching, and breakage. Fluid flow across the surface provides a cleaning action that extends the life of your electrode and improves performance! 

Replaceable cartridges allow you to keep your original housing. Annular junction prevents clogging and allows fast, stable response. Use in viscous solutions with sulfides or heavy metals. 

Select CPVC or chemical-resistant KYNAR ®  housings (housings include one electrode cartridge). All five electrodes styles are rated to 100 psi at 170ºF (76ºC); 50 psi at 212ºF (100ºC). 

Electrode assemblies include a 10-ft detachable cable with BNC pH connector, tinned-ends temperature element connector (when applicable), VITON O-rings, and instructions. Use all models with a preamplifier kit (sold separately) for remote mounting up to 1000 feet away.CPVC and KYNAR components are not interchangeable.This submersible electrode is ideal when your system calibrates outside your tank but gives incorrect readings when installed. Combat interference with a solution ground and internal battery powered ground loop interrupt. Built-in amplifier in electrode cartridge permits long cable runs.