Save time and money by providing test and data management for your pipettes, right in your lab!

Test in accordance with tolerances specified in ISO 8655 and gravimetric method

Precise measurements are ensured by the evaporation trap and thermistor

Simplified data management with the special pipette software (included)

Software operating requirements: operating system of Windows® XP SP2 or later,

Pentium CPU or the equivalent, 512 MB of RAM, and approximately 50 MB of hard disk space

Everything comes in a compact and organized briefcase

The pipette accuracy testers perform and verify a simple accuracy test of the volume of a pipette in accordance with ISO 8655 or any gravimetric method without having to send your pipettes in for expensive and lengthy verification. The precision of your readings is preserved with the built-in evaporation trap, which maintains humidity and prevents evaporation of the liquid inside. The evaporation trap eliminates the need for considering measurement errors and adjusting the humidity of an entire room to perform your testing. It also function as a breeze break to shield your balance from drafts and to ensure stable weighing. The 07911-12 is equipped with a smart range function, meaning that the minimum weighing value will switch automatically based on the range the balance is in. (When the mass value exceeds 31 g, the minimum weighing value will automatically switch from 0.01 mg to 0.1 mg.) 

The WinCT-Pipette Software is designed specifically for the pipette accuracy testers to send and save important data and reports. The mass value of the distilled water dispensed from a pipette is transmitted from the balance to a PC where the software records the following: pipette volume, test numbers, test dates and pipette information (manufacturer, model, serial number).

What’s Included:
Carrying case with shoulder belt and key, evaporation trap, sample cups (2 each of 5 mL and 30 mL), test liquid cup, thermometer with clamp, RS-232 cable and USB converter, WinCT-Pipette software, and calibration weight.

在你的实验室提供测试和数据管理为您的移液管，节省时间和金钱！

测试按照规定的公差在ISO 8655和重量法

精确的测量，确保蒸发陷阱和热敏电阻

简化的数据管理与特殊的的吸管软件（包括）

软件操作要求：操作系统的Windows®XP SP2或更高版本，奔腾CPU或同等学历，512 MB ​​RAM，和大约50 MB的硬盘空间

一切都在一个紧凑的和有组织的公文包

移液管准确度测试仪执行和验证一个简单的精度测试按照ISO 8655或任何重量的方法，而无需昂贵和漫长的验证发送您的移液器吸液管的体积。读数的精度被保留与内置的蒸发陷阱，保持湿度并防止内部的液体的蒸发。的蒸发器，消除了需要考虑测量误差，和调整的整个房间的湿度执行您的测试。它也可以作为一件轻而易举的打破，以保护您的余额草案，并确保稳定的称量。07911-12是配备一个智能的距离函数，这意味着最小称重值将自动切换的基础上的范围内的平衡是英寸（当质量值超过31克，，最小称重值将自动切换从0.01毫克到0.1毫克）。WinCT移液器软件是专为移液管准确度测试仪发送和保存重要的数据和报告。该质量值的蒸馏水水从一个吸管分配的传输从一个PC在那里的软件记录的下列：移液管量，测试号码，测试日期和吸管信息（制造商，型号，序列号）。包含的内容：账面平衡肩带和关键，蒸发陷阱，样品杯（2个5毫升和30毫升），测试液杯，温度计，钳，RS-232连接线，USB转换器，WinCT移液器软件，校准砝码的情况。